BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and the water-cooled crucible. They also allow particulate free pocket replenishment and eliminate the risk of contamination when one material replaces another in a given pocket. The liners are available for most typical evaporators and hearth configurations. No results were found for the filter!
Reducing Liner Copper 40 cm³ to 20 cm³ Reducing Liner Copper 40 cm³ to 20 cm³ fitting for Ferrotec 40 cm³ crucible for liner of 20 cm³ (ø 42,5 x 19,5 mm)
Order number: 21040-20-F-CU
€250.00 *
Liner Graphite, 40 cm³ - SB-C10-6 Liner Graphite, 40 cm³ - SB-C10-6 Top diameter: 51,5 mm Height: 25,9 mm Wall Thickness: 2,36 mm Angle: 15°
Order number: 21040-GR
€120.00 *
Liner Molybdenum, 100 cm³ Liner Molybdenum, 100 cm³ for ESY110 Evaporator according to drawing 7279_20012014_1 Bottom diameter: 63,5 mm Height: 27 mm Wall thickness: 5 mm
Order number: 21100-E5-MO
€241.00 *
Liner Graphite, 100 cm³ Liner Graphite 100 cm³ for Telemark Electron Beam Evaporator Top Diameter A: 68,4 mm Height B: 37,3 mm Wall Thickness C: 2,36 mm Cone: 15°
Order number: 21100-GR
€200.00 *
Liner Copper 100 cm³ Reucing Liner Copper, 100 cm³-> 25 cm³ Top diameter: 68,6 mm Height: 37,3 mm Cone: 15°
Order number: 21100T-25-CU
€290.00 *
Liner Molybdenum, 100 cm³ Liner Molybdenum, 100 cm³ for Telemark Evaporator, Ferrotec EV 1-100 Top diameter: 68,6 mm Height: 37,3 mm Cone: 15° Wall thickness: 5 mm
Order number: 21100T5-MO
From €216.90 *
Liner Tungsten 100 cm³ Liner Tungsten 100 cm³ for Telemark Evaporator Top diameter:68,6 mm Height:37,3 mm Angle:15° Wall Thickness:5 mm
Order number: 21100T5-W
€450.00 *
Liner Intermetallic, 8 cm³ Liner Intermetallic, 8 cm³ Material: BN-TiB2 Top Diameter: 30.0 mm Height: 15 mm Wall Thickness: 2,4 mm Angle: 15°
Order number: 21008-INT
From €175.00 *
Liner Intermetallic, 12 cm³ Liner Intermetallic, 12 cm³ Material: BN-TiB2 Top diameter: 34 mm (1.340") Height: 19,5 mm (0.768") Wall thickness: 2,36 mm (0.093")
Order number: 21012-INT
€240.00 *
Liner Intermetallic, 4 cm³ Liner Intermetallic, 4 cm³ Top Diameter A: 22,5 mm Height B: 15 mm Wall Thickness C: 2,36 mm Angle: 15°
Order number: 21004-INT
From €160.00 *
Liner Intermetallic, 20 cm³ Liner Intermetallic, 20 cm³ Material: BN-TiB2 Top Diameter: 42,5 mm (1.673 in.) Heigt: 19,5 mm (0.768 in.) Wall Thickness: 2,36 mm (0.093 in.) Cone: 15°
Order number: 21020-INT
€200.00 *
Liner Tantalum, 7 cm³ Liner Tantalum, 7 cm³ Top Diameter A: 29,6 mm (1.167") Height B: 14,3 mm (0.563") Wall Thickness C: 2,36 mm (0.093") Angle: 15°
Order number: 21007-TA
€460.00 *
Viewed