Liners

BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and the water-cooled crucible. They also allow particulate free pocket replenishment and eliminate the risk of contamination when one material replaces another in a given pocket. The liners are available for most typical evaporators and hearth configurations. Please ask for details if you do not find your liner in our list. We certainly can supply you with the right product.

 

 

 

BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and... read more »
Close window
Liners

BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and the water-cooled crucible. They also allow particulate free pocket replenishment and eliminate the risk of contamination when one material replaces another in a given pocket. The liners are available for most typical evaporators and hearth configurations. Please ask for details if you do not find your liner in our list. We certainly can supply you with the right product.

 

 

 

Close filters
 
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
7 From 9
No results were found for the filter!
Liner Molybdenum, 35 cm³ reduced
Liner Molybdenum, 35 cm³ reduced
Liner Molybdenum, 35 cm³ reduced according to drawing 21035-Sill
21035-MO-SILL
€135.00 *
Liner Tungsten, 35 cm³
Liner Tungsten, 35 cm³
Liner Tungsten 35 cm³ for Ferrotec / SmartBeam EV/EB M-8 Evaporator
21035-W
€320.00 *
Liner Molybdenum, 40 cm³
Liner Molybdenum, 40 cm³
Liner Molybdenum, 40 cm³ for Ferrotec/Smartbeam Outer diameter: 51,0 mm Height: 20,5 mm with ledge Wall thickness: 2,5 mm Cone: 30° Inner volume: 23 cm³
21040-F-MO
€180.00 *
Liner Molybdenum, 40 cm³
Liner Molybdenum, 40 cm³
Liner Molybdenum, 40 cm³ for Telemark/Temescal evaporators Top diameter: 2.030" Height: 1.020" Wall thickness: 0.125"
21040-T2-MO
€180.00 *
Liner Molybdenum, 50 cm³
Liner Molybdenum, 50 cm³
Liner Molybdenum, 50 cm³ with ledge for ESQ212 Top diameter: 59,0 mm Height: 23,0 mm Wall thickness: 3 mm Inner volume: 30 cm³
21050-MO-1
€180.00 *
Liner Molybdenum, 60 cm³
Liner Molybdenum, 60 cm³
Liner Molybdenum, 60 cm³ with ledge Top diameter: 55,0 mm Height: 30,0 mm Wall thickness: 5 mm
21060-MO-3
€180.00 *
Liner BoronNitride, 80 cm³
Liner BoronNitride, 80 cm³
Liner BoronNitride, 80 cm³ for ESQ single pocket Top OD: 73.8 mm Height: 21 mm Angle: 15°
21080-B-BN
From €300.00 *
Reducing Liner Copper 40 cm³ to 4 cm³
Reducing Liner Copper 40 cm³ to 4 cm³
Reducing Liner Copper 40 cm³ to 4 cm³ resulting inner dia 22.50 mm resultung height: 15.0 mm
21040-04-F-CU
€250.00 *
Reducing Liner Copper 6 cm³ to 4 cm³
Reducing Liner Copper 6 cm³ to 4 cm³
Reducing Liner Copper 6 cm³ to 4 cm³ for use of standard 4 cm³ liners
21006-04-CU
€140.00 *
Liner Molybdenum, 6 cm³ - RevB
Liner Molybdenum, 6 cm³ - RevB
Liner Molybdenum, 6 cm³ - RevB reduced to 1,3 cm³ upper diameter: 26.5 mm height: 15 mm inner diameter: 20,5 mm depth: 4,85 mm
21006-02B-MO
€90.00 *
Reducing Liner, Copper, 20 cm³ --> 4 cm³
Reducing Liner, Copper, 20 cm³ --> 4 cm³
Reducing Liner, Copper, 20 cm³ --> 4 cm³ Inner volume: 4 cm³ Upper outer diameter: 22,5 mm Height: 15 mm
21020-04-CU
€140.00 *
Liner Molybdenum, 25 cm³
Liner Molybdenum, 25 cm³
Liner Molybdenum, 25 cm³ for Temescal Evaporators top diameter A: 44,1 mm (1.74") (bottom diameter: 35,0 mm - 1.38") Height B: 17,0 mm (0.67") Wall thickness C: 2,4 mm (0.093") Cone: 15°
21025-MO
€150.00 *
7 From 9
Viewed