BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and the water-cooled crucible. They also allow particulate free pocket replenishment and eliminate the risk of contamination when one material replaces another in a given pocket. The liners are available for most typical evaporators and hearth configurations. No results were found for the filter!
Liner Molybdenum, 25 cm³ Liner Molybdenum 25cm³ for Leybold ESV Top Diameter: 39.5 mm (+0, -0.2mm) Height: 25.0 mm Wall thickness: 1 mm Angle: 15° Outer Radius: 3 mm Inner Radius: 1 mm All other corners: radius 0.030"
Order number: 21025L-MO
€150.00 *
Liner Tungsten, 25 cm³ Liner Tungsten, 25 cm³ for Telemark Evaporators top diameter A: 41,5 mm Height B: 23,6 mm Wall thickness C: 2,3 mm Cone: 15°
Order number: 21025-T2-W
€245.00 *
Liner Tungsten, 30 cm³ Liner Tungsten, 30 cm³ Top diameter: 1.920" Height: 0.790" Wall thickness: 0.125" Angle: 15° Fil-Tech PN: EC0030-2
Order number: 21030-T-W
€195.00 *
Liner Molybdenum, 35 cm³ - thermically decoupled Liner Molybdenum, 35 cm³ - thermically decoupled
Order number: 21035-5-MO
€145.00 *
Liner FABMATE, 35 cm³ Liner FABMATE, 35 cm³ Top diameter A: 53.0 mm Height B: 19.5 mm Wall thickness C: 2.36 mm Half Cone Angle: 15°
Order number: 21035-FM
From €270.00 *
Liner Molybdenum, 35 cm³ Liner Molybdenum, 35 cm³ Top diameter A: 53,0 mm Height B: 19,5 mm Wall Thickness C: 2,5 mm Angle: 15°
Order number: 21035-MO
€125.00 *
Liner Molybdenum, 35 cm³ Liner Molybdenum, 35 cm³for Ferrotec EV M-8 Evaporator Balzers configuration
Order number: 21035-MO-2
€125.00 *
Liner Molybdenum, 35 cm³ reduced Liner Molybdenum, 35 cm³ reduced according to drawing 21035-Sill
Order number: 21035-MO-SILL
€135.00 *
Liner Tungsten, 35 cm³ Liner Tungsten 35 cm³ for Ferrotec / SmartBeam EV/EB M-8 Evaporator
Order number: 21035-W
€320.00 *
Viewed