BeamTec provides a wide selection of crucible liners for electron beam sources. Crucible liners are used to increase evaporation rates by reducing heat transfer between the evaporant material and the water-cooled crucible. They also allow particulate free pocket replenishment and eliminate the risk of contamination when one material replaces another in a given pocket. The liners are available for most typical evaporators and hearth configurations. No results were found for the filter!
Liner Molybdenum, 15 cm³ Liner Molybdenum, 15 cm³ Top Diameter A: 37,6 mm Height B: 17,0 mm Wall Thickness C: 2,36 mm Angle: 15°
Order number: 21015-MO
€98.00 *
Liner Molybdenum, 15 cm³ Liner Molybdenum, 15 cm³ - Thin Wall for Telemark / Temescal evaporators TD: 1.537" / 3,9 cm H: 0.670" / 1,7 cm Wall thickness: 0.070" / 0,18 cm Bottom thickness: 0.100" / 0,254 cm
Order number: 21015-T2-MO
€98.00 *
Liner Molybdenum, 15 cm³ Liner Molybdenum, 15 cm³ - Thin Wall for Telemark / Temescal evaporators TOD: 1.537" TID: 1.337" H: 0.630" Bottom thickness: 0.100" Outer / Inner Angle: 15° / 12°
Order number: 21015-T3-MO
€95.00 *
Liner Tungsten, 15 cm³ Liner Tungsten 15 cm³ for Telemark / Temescal evaporators TD: 1.480" H: 0.670" Wall thickness: 0.125"
Order number: 21015-T-W
€170.00 *
Liner Tungsten, 15 cm³ Liner Tungsten 15 cm³ Top Diameter A: 37,6 mm (1.480 in) Height B: 17,0 mm (0.670 in) Wall Thickness C: 2,36 mm (0.093 in) Half Cone Angle: 15°
Order number: 21015-W
€170.00 *
Reducing Liner, Copper 20 cm³ --> 8 cm³ Reducing Liner, Copper 20 cm³ --> 8 cm³ for Ferrotec EB M-8, 6 hearths configuration inner volume: 8 cm³ top diameter: 30 mm height: 15 mm outer geometry for 6x 20 cc EVM8 crucible (OD 42 depth 19.5 mm angle 15°) inner geometry for...
Order number: 21020-08-CU
€145.00 *
Liner BoronNitride, 20 cm³ Liner BoronNitride, 20 cm³ Top diameter: 42,5 mm Height: 19,5 mm Half cone angle: 15°
Order number: 21020-BN
€230.00 *
Liner FABMATE, 20 cm³ Liner FABMATE, 20 cm³ appropriate for EV M-8 / EB M-8 Top Diameter: 42,5 mm (1.673 in) Heigt: 19,5 mm (0.768 in) Wall Thickness: 2,36 mm (0.093 in) Cone: 15°
Order number: 21020-FM
From €300.00 *
Liner Graphite, 20 cm³ Liner Graphite, 20 cm³ Top Diameter: 42,5 mm Height: 19,5 mm Wall Thickness: 2,36 mm
Order number: 21020-GR
From €60.00 *
Liner Molybdenum, 20 cm³ Liner Molybdenum, 20 cm³ for Ferrotec EB M-8, 6 crucibles configuration Top Diameter: 42,5 mm (1.673 in.) Heigt: 19,5 mm (0.768 in.) Wall Thickness: 2,36 mm (0.093 in.) Cone: 15°
Order number: 21020-MO
From €115.00 *
Liner Tungsten, 20 cm³ Liner Tungsten, 20 cm³ Top Diameter: 42.5 mm Height: 19.5 mm Wall Thickness: 3,2 mm Cone: 15°
Order number: 21020-W
€195.00 *
Viewed